FFP3 Face Mask

FFP3 Face Mask with Active Carbon & Exhalation Valve — CE EN149 Certified Respiratory Protection

Xi'An PPE MAX Co., Ltd produces respiratory protection for healthcare and occupational settings. Our line includes the FFP3 Face Mask, built with a rigid cup shape. An active carbon non-woven filter sits inside. An exhalation valve lowers breathing resistance. It keeps the inside drier too when the mask stays on for long hours. CE EN 149:2001+A1:2009 certification covers the mask. Filtration efficiency against solid and liquid aerosols reaches ≥99%. Total Inward Leakage (TIL) holds at 2% or less.

What Is This Product?

FFP3 is the top class under the European EN 149 standard for Filtering Face Pieces. At least 99% of airborne particles get filtered. Asbestos fibers and silica dust fall into that group. Ceramic particles are trapped as well. Bacteria and viruses, the biological aerosols, get filtered too.

Far more leakage gets through surgical masks and lower-grade respirators. On the face, the FFP3 design closes into a tight seal. TIL never goes above 2%. Airborne concentrations in some workplaces can reach 50 times the Occupational Exposure Limit (OEL). This mask suits those settings.

Standard Specifications

Product Features

Active Carbon Non-Woven Filter Layer

Chemical vapors and fine particulates are adsorbed by the active carbon layer. That is what the layer is built to do. It works together with multi-layer electrostatic melt-blown fabric. Both mechanical and electrostatic filtration mechanisms are covered. Compared with standard non-woven layers, the mask can handle a wider range of hazards.

Cup-Shape Design

The cup is rigid, so moving and talking do not make it lose shape. Bending does not either. Inhalation pressure will not make it collapse inward. That keeps the filter media away from direct contact with the mouth. A steady air channel inside the cup is maintained too.

Exhalation Valve

The exhalation valve makes breathing feel easier. It also cuts down heat and moisture that build up inside the cup when someone wears the mask for hours. Valved masks should not be used in sterile source-control settings, though. Air that is breathed out does not pass through a filter.

Adjustable Headbelt Harness

With this headbelt, tension sits across the back of the head. It does not press on the ears. The adjustable buckle makes a firm FFP3 Face Mask seal easy to reach. No pressure points form. Staff in busy workplaces also get the mask on faster.

Key Performance Points

• Filters ≥99% of solid and liquid aerosols, including sub-micron particles, per CE EN 149 test protocol
• TIL ≤2% limits the volume of contaminated air entering around the facial seal
• Exhalation valve reduces internal moisture and heat accumulation during long shifts
• Active carbon layer provides additional adsorption of organic vapors and odors
• Cup shape maintains facial clearance and resists deformation under inhalation pressure
• Meets flammability requirements under EN 149, relevant to industrial hot-work zones
• CO₂ dead space ≤1.0% by volume, within the standard limit
• CE EN149 Category III: the highest regulatory tier for PPE under EU Regulation (EU) 2016/425

Typical Applications

Healthcare Settings

Some medical tasks produce aerosols (AGPs). Intubation, bronchoscopy, and dental work are among them. The filtration level this mask gives is what staff who do these jobs need. Airborne pathogens like Mycobacterium tuberculosis and SARS-CoV-2 are the concern. The ≥99% efficiency and ≤2% TIL figures matter here.

Asbestos and Silica Abatement

Construction and demolition sites hold Group 1 carcinogens. FFP3-rated filtration is needed by the workers who handle them. The mask traps asbestos microfibers. Respirable Crystalline Silica (RCS) gets caught too, and that dust comes from concrete cutting and similar jobs.

Powder Handling in Pharma and Chemical Work

An Assigned Protection Factor (APF) of 20 comes with the FFP3 classification. That number is the one that counts in cytotoxic drug production and fine chemical powder work. Some processing areas also have organic vapors. The active carbon layer acts as a second barrier against them.

About Xi'An PPE MAX Co., Ltd, an FFP3 Face Mask Supplier

Xi'An PPE MAX Co., Ltd has built occupational safety equipment since 1956. Both manufacturing and quality work follow the EU PPE Regulation (EU) 2016/425 Category III rules. Under those rules, internal testing alone is not enough, third-party Notified Body verification is required. CE marking sits on every certified product. Each item stays traceable through the matching Notified Body number that comes with it.

Certifications

• This is Category III PPE. It was tested to CE EN 149:2001+A1:2009
• Under EU PPE Regulation (EU) 2016/425, an authorized Notified Body certifies it
• Each unit comes with the CE marking and a 4-digit Notified Body code

Packing

Each mask stays sealed against moisture and contamination right up to the moment it is used. Standard packaging handles that job. For bulk B2B supply, packing is built around pallet loads and export logistics. Your own label is possible too. Custom labeling and private label work can be arranged. Get in touch and tell us what FFP3 Face Mask you need.

Technical Support

• Test reports and technical documentation provided on request
• Fit testing guidance and user instruction support available
• A contact person just for B2B procurement inquiries

FAQ

Q: How do FFP2 and FFP3 differ?

A: FFP2 catches 94% or more of particles, and its TIL comes in at roughly 8%. Filtration reaches 99% plus with This product, while TIL drops to 2% or less. Handling toxic, carcinogenic, or radioactive particulates? That work calls for FFP3. Applicable regulations do not treat FFP2 as enough there.

Q: Can this mask be reused?

A: This mask carries the NR (Non-Reusable) mark. One shift is the limit, and 8 hours is the most you get. Once it has been worn, throw it away. Cleaning it is not allowed, and wearing it past that time is out too.

Q: What is the reason for the exhalation valve on this mask?

A: You breathe easier with one, and less water builds up inside the cup over a long shift. Keep this in mind: a valved mask is a bad pick when you have to stop germs from leaving the wearer. Sterile clinical areas are one example. We went over that point already.

Q: How does facial hair affect performance?

A: Any facial hair that sits under the seal, stubble included, can break the negative pressure seal. Leakage then goes up a lot. For FFP3 to work, every point where the mask touches the face has to be clean-shaven. A clean-shaven face is also a condition of fit testing.

Q: What does the 'D' marking indicate?

A: That 'D' mark shows the mask passed the Dolomite Clogging Test, which is optional. Breathing resistance stays inside the standard limits, even in dusty air. Clogs form slower, so the filter keeps working longer.

Q: What is the active carbon layer for?

A: Particles get trapped in a standard melt-blown layer in two ways. One is mechanical. The other is electrostatic. Vapors are also adsorbed by the active carbon layer on top of that. So a mask like this works well in places where particles turn up alongside organic vapors or chemical odors.

Contact Us

For product specifications or FFP3 Face Mask ordering inquiries, reach our team at bettybing@ppemax.com. We support B2B buyers, distributors, and procurement teams.