Safety Face Mask

Safety Face Mask Half Facepiece Respirator | CE EN 140:1998 Certified

Workplace safety equipment has been built by Xi'An PPE MAX Co., Ltd since 1956. Our TPE half facepiece respirator is a Safety Face Mask, and it is made for real industrial environments. The body measures 125 × 105 × 145 mm and weighs 115 g. Sizes S, M, and L are all offered. Dust filters and gas filters both fit the bayonet interface. Storage stays compact and release happens fast, because a drop-down strap works with a collapsible headharness. CE certified under EN 140:1998.

What Is This Product?

Hazardous particles, biological agents, and liquid aerosols never reach the lungs of the wearer when This product is worn. The device sits in the Respiratory Protective Device (RPD) family. Filtration usually relies on inertial impaction or interception. Diffusion and electrostatic attraction are the other two mechanisms you will come across.

These masks answer concrete workplace risks for B2B buyers. Silicosis and other occupational lung diseases are one of them. Cross-contamination in controlled environments is another. Compliance counts as well, and that takes in regulations such as OSHA and EU-OSHA requirements.

Standard Specifications

Key Features

Drop-Down Strap for Quick Release

The drop-down strap lets the wearer lower the mask. The headharness stays where it is. That helps when someone moves between jobs that need respiratory protection and jobs that do not.

Collapsible Headharness

Folded flat, the harness takes up little space. A work bag or a toolbox will hold the mask fine. The facepiece keeps its shape either way.

Bayonet Filter Interface

The bayonet connection accepts both dust filters and gas filters. Switching filter types to match the hazard — particulates or chemical vapors — does not require tools.

TPE Facepiece

TPE gives a soft, flexible Safety Face Mask seal against the face. Sweat and oils do not wear it down. Since the material bends, contact holds up across many face shapes.

Applications

Industrial Manufacturing & Mining

Silica dust, metal fumes, and mineral particles show up in some workplaces. For those jobs, this half facepiece takes compatible P2 or P3 dust filters. That gives respiratory protection during grinding, sanding, and processing work.

Chemical Processing & Laboratory Work

Fit the right gas filters and the bayonet interface lets the mask work against organic vapors too. Fine chemical powders are covered as well. A close seal comes from the TPE facepiece, which keeps leakage down.

Construction & Welding

On site, welding fumes are a common hazard. So is wood dust. Construction particulates count as well. Workers who move between tasks all day get a practical mask here: the harness folds up and the strap releases fast.

Why Choose Us?

Safety equipment has been made by PPE MAX since 1956. This half facepiece respirator holds CE certification under EN 140:1998. Every order ships with CE certificates and product data sheets.

Procurement managers, safety officers, and distributors deal with our team directly. That way each operation gets the right specification. Filter type combinations and sizing options are open for discussion, based on what you need.

If you have questions about filter compatibility or replacement schedules, contact us at bettybing@ppemax.com.

Safety Face Mask Certifications

Packing

Packing is done so the TPE facepiece does not deform in transit. Standard export carton packing for the Safety Face Mask is available. For bulk orders, contact us to talk through packing configurations.

FAQ

Q: How do N95, FFP2, and KN95 masks differ?

A: N95 is built to NIOSH standards. Testing there uses NaCl aerosol. FFP2 comes under EN 149, and it gets tested with two aerosols: NaCl and paraffin oil. Its Total Inward Leakage has to stay at or below 8%. KN95 works to China's GB 2626. The filtration threshold sits close to the N95 level. Fit testing protocols, though, are not the same.

Q: Can the facepiece body be cleaned?

A: You can wipe the TPE facepiece down between uses. Filters are a different story. Swap them out on the schedule the manufacturer gives you. Never wash them. Washing may break down how well they filter. Need advice on replacement intervals for your own application? Get in touch.

Q: Does an exhalation valve affect protection?

A: Heat and humidity build up inside a mask. A valve lets some of that out, so the mask feels better when you wear it for long shifts in industrial settings. Sterile medical environments are a different story. There, valved masks usually are not suitable, since the air you breathe out leaves the mask unfiltered.

Q: Why is fit testing required in industrial workplaces?

A: A high-filtration mask gives you only limited protection when the seal around the face leaks. Fit testing is required by many occupational health rules, OSHA among them. Those tests, qualitative or quantitative, show that a mask closes properly on the face of each person who wears it.

Q: Which filters fit the bayonet interface?

A: The bayonet connection accepts standard dust filters and gas filters. Contact us at bettybing@ppemax.com to confirm compatibility with the specific filter types required for your application.

Q: Is this mask available in custom configurations?

A: Filter type combinations and sizing can be discussed based on your operation's requirements. Reach out to our team to go over specifications.

Contact Us

For samples, certifications, or a bulk quote, email us at bettybing@ppemax.com. Our team is ready to assist with your Safety Face Mask requirements.