Paint Mask

Full Face Paint Mask Respirator for Industrial Coating — CE EN 136:1998 Certified | PPE MAX

Xi'An PPE MAX Co., Ltd has worked on respiratory protection for the workplace since 1956. Medical-grade silicone makes up the body of our full-face Paint Mask. Its PC face shield will not fog up, and it shrugs off impacts and scratches. Pick from two sizes, M and L. A bayonet or RD40 connector joins the mask to the rest of the setup. A 6-point headbelt holds it steady, so leakage stays low. The mask is certified to CE EN 136:1998. It was built for overspray risks and VOC exposure. Spray booths are one place where those turn up. Aerospace coating work and automotive finishing are others.

Xi'An PPE MAX Co., Ltd: This Product Manufacturer & Supplier

PPE MAX was founded in 1956 and has spent over six decades concentrating on occupational health and worker safety. We design and produce in-house — we are not a trading company.

Our engineering team draws on hands-on production experience when developing every product. Equipment we ship has been evaluated under real working conditions by our own staff before it reaches customers.

What Is This Product?

This product is a full-face respirator. Workers wear it to stay safe from hazardous substances floating in the air. It gets used during surface coating jobs, and in painting and finishing work too.

One job is all a basic dust mask handles. A professional-grade respirator covers two. High-efficiency particulate filtration traps aerosols and overspray. The rest is left to chemically active cartridges. Inside them, impregnated activated carbon adsorbs VOCs, solvent vapors and acid gases.

Toluene and xylene turn up in 2K polyurethanes and epoxy paints. Ketones and isocyanates do too. Plenty of research documents the health risks. Acute solvent intoxication is one of them. Another is occupational asthma. Long-term neurological effects show up as well. This product is the main respiratory barrier against these substances in spray booths and confined coating spaces.

Standard Specifications

Product Features

Silicone Face Skirt

Medical-grade liquid silicone rubber does not set off allergies. Heat does not throw it off either. The material follows the shape of the face closely. That gives a steady fit, so Total Inward Leakage stays below 2% right through continuous spray sessions.

Never-Fog PC Face Shield

Never-fog technology sits inside the polycarbonate visor. Your view stays clear, even when the work gets physical. Impact resistance is built in as well. An anti-scratch coating lets the visor cope with tough coating environments.

6-Point Headbelt System

Pressure spreads evenly over the head thanks to six adjustment points. With steady strap tension, the seal shifts less through long shifts. Users also have to readjust far less often.

Dual Connector Compatibility

Bayonet and RD40 connectors both work here. That means crews can keep using OV (Organic Vapor) or A2P3 combination filter cartridges built to EN 14387. No extra hardware to buy.

High-Flow Paint Mask Exhalation Valve

Breathing out takes little effort, since resistance stays under 25 mm H₂O. Heat leaves fast. Moisture clears the same way, which cuts the build-up inside, and the visor keeps clear through long stretches of wear.

Key Advantages

• Two paths do the filtering: one traps particles, the other uses activated carbon to adsorb VOCs and solvent vapors
• Medical-grade silicone makes up the face seal. It follows the shape of your face, which keeps leaks low (TIL < 2%)
• Never-fog PC visor maintains clear vision during multi-layer painting operations
• Compatible with standard OV and A2P3 cartridges meeting EN 14387 — readily sourced internationally
• It holds CE EN 136:1998 certification. Regulated buying processes across Europe accept it on that basis
• Heat does not break these materials down. Brief exposure up to 93 °C (200 °F) is fine

Applications for Paint Mask

Aerospace and Military Coating

On fuselage jobs, coatings go straight onto the surface. A tight seal has to hold for a whole shift. Solvents fill aerospace paints and primers. The mask must cope with those as well.

Automotive Customization and Body Shops

Paint booths often run bake cycles. Heat spikes for a short time. Through those bursts, the silicone face skirt and the thermally stable PC shield stay sealed and keep their shape.

Industrial and Architectural Coating

Fumes come off epoxy, urethane, and lacquer when crews work on structural surfaces. A full shift calls for VOC protection crews can count on. The 6-point headbelt plays a part. So does the low-resistance exhalation valve. Long wear becomes practical with both.

Why Work With PPE MAX?

PPE MAX started up in 1956. That is more than six decades spent making respiratory protection and nothing else. Everything gets built in-house. We keep direct control of quality that way, instead of handing production to a third party.

Our own team puts the gear we make through real working conditions. What comes back from that feeds into product refinements. Formal testing data feeds in too.

Sizes M and L are on offer. Pick a bayonet or an RD40 connector. Need terms for a volume order? We are glad to talk them through. If a specific application raises questions, contact us before you order.

Certifications

• CE EN 136:1998: this is the European Union rule covering full face masks worn as breathing protection devices

Packaging

Every item is packed with a Paint Mask to survive the trip abroad. Standard export packaging goes on all orders. Custom labels and bulk packing are possible when the order is larger. Just tell us what you need. We will handle the rest.

After-Sales Support

Fit problems can happen. So can filter compatibility questions. Maybe you need replacement parts after your order arrives. Reach out to our team either way. We will work through the issue with you.

Factory Visits & Exhibitions

PPE MAX shows up at international safety and PPE trade exhibitions. Want to inspect our production process in person? Buyers are welcome to arrange a factory visit. Get in touch to schedule one.

FAQ

Q: What filter cartridges are compatible with this mask?

A: Bayonet and RD40 connectors are both supported by the mask. That means it works with standard OV (Organic Vapor) and A2P3 combination cartridges built to EN 14387.

Q: Can workers with latex sensitivities use the silicone face seal?

A: The silicone is medical grade. It is hypoallergenic and holds no latex. A worker with a latex or rubber allergy can still use it.

Q: What sizes are available?

A: You can get the mask in M (Medium) and L (Large). Each size range still gives you extra fine adjustment thanks to the 6-point headbelt.

Q: Will this mask work in automotive paint booths that run bake cycles?

A: Yes. The PC face shield and the silicone handle heat well. They are rated for short exposure up to 93 °C (200 °F). Bake cycle conditions in standard automotive paint booths fall inside that range.

Q: What areas does CE EN 136:1998 certification cover?

A: Full face masks used for respiratory protection follow the European standard CE EN 136:1998. That standard sets clear requirements. It says how well the mask must seal and how clear the visor must be. Mechanical strength is covered as well. So is the overall level of protection.

Q: What stops my visor from fogging up while I am spraying?

A: The PC visor uses built-in never-fog technology. The high-flow exhalation valve helps manage internal heat and moisture by keeping exhalation resistance below 25 mm H₂O.

Contact Us

Have a question or ready to place an order? Email us at bettybing@ppemax.com and our Paint Mask team will respond.