Full respirator mask

Full Respirator Mask for Industrial Protection — Sealed Eye and Respiratory Coverage

Since 1956 Xi'An PPE MAX Co., Ltd has built full respirator masks and shipped them to industrial buyers around the world. Medical-grade silicone or thermoplastic elastomer (TPE) goes into every mask. The seal crosses the forehead, the cheeks and the chin. Eyes, nose and mouth sit behind a single barrier. In standard negative-pressure mode the design reaches an Assigned Protection Factor (APF) of 50. Connect it to a powered air-purifying or supplied-air system and that number rises to APF 1000. CE certification support ships with the order. So does custom branding. Filter matching comes with it as well.

What Is This Product?

This product is a PPE device that seals the face. You get eye protection and breathing protection in one piece. A half-face respirator leaves the eyes uncovered. This design covers the whole face: forehead, cheeks, chin. Goggles worn with a lower-face mask can leave a gap. Here no gap opens up. There are no separate parts to line up.

That counts wherever gases, vapors or fine particulates irritate the eyes and the airways. Some of them pass through the eyes as well. With one sealed unit there is no alignment problem. No compatibility risk either. Those issues show up only when two separate products have to work together.

Dead space traps CO₂. An internal nose cup brings that build-up back down. Fogging also stays away from the lens on long shifts, or when the work turns physical. Hour after hour, workers keep clear vision and steady protection.

Standard Specifications

Key Features

Full-face sealing geometry: the mask rim sits tight on the forehead, cheeks, and chin. Contact never breaks. No part of the face is left open. A gap like that can appear with goggles or half-masks when you wear them alone.

Anti-fog polycarbonate visor: made of high-impact PC. Scratches are kept away by a hard coat. A hydrophilic anti-fog treatment stops the view from clouding. Optical standards ANSI Z87.1 and EN 166 are both met.

Nose cup design: fit a nose cup and CO₂ has less dead space to gather in. Lens fogging drops too. That matters when the job gets physical.

Speech diaphragm / voicemitter: you get one on some models. Inside the mask there is a membrane. It lets the wearer give verbal instructions. The face seal stays intact while talking.

Modular filter interface: standard RD40 / EN 148-1 threaded connectors take many cartridges. Organic vapor units fit. So do acid gas ones. P100 particulate filters screw on too. Combination types work the same way.

Applications

Chemical Manufacturing & Processing: on this kind of site, VOC levels often pass the PEL limit set for a half mask. Chlorine belongs to that group. Ammonia and formaldehyde can hit those levels as well. Acid gases sting the eyes. Full face coverage, specifically a Full respirator mask, is a must here.

Industrial Painting & Surface Coating: in spray booths, workers get cover from isocyanates and epoxy resin mist. The visor is sealed, so overspray cannot reach mucous membranes. Solvent vapors get trapped by cartridge filters. Toluene is one of them. Xylene and ketones are others.

Asbestos Abatement & Heavy Remediation: the APF 50 rules in OSHA 29 CFR 1926.1101 are met by this gear. Inside negative-pressure containment zones, a full facial seal is what counts. Workers there handle asbestos and crystalline silica fibers.

Pharmaceutical Production: fine API dust and chemical vapors both cause trouble here. Controlled manufacturing sites have rules for exposure through breathing and through the eyes. Both routes are covered by this gear.

Why Work With PPE MAX

Xi'An PPE MAX Co., Ltd has been manufacturing personal protective equipment since 1956. Over that period the company has supplied industrial buyers across chemical, pharmaceutical, construction, and remediation sectors.

• CE certification support is included with orders
• Orders can start at 100 pcs. That puts the range within reach of small and mid-size buyers
• Standard orders ship within 7 days
• Custom logo and private-label packing are available from MOQ
• One-stop filter and accessory matching is available
• Spare parts — replacement visors, head harnesses, exhalation valves, and filter connectors — are stocked for ongoing maintenance

Full respirator mask certifications

• CE Certification (EN 136 Class 1 / 2 / 3 compliant)
• Visor meets ANSI Z87.1 and EN 166 impact and optical standards
• Filter connectors conform to EN 148-1 / RD40 threading standards

Packing

Every order goes out in standard export cartons. From MOQ upward, custom logo boxes and private-label packaging are offered. Packing details get confirmed before production starts, based on your shipping and retail needs.

After-Sales Support

Spare Full respirator mask parts for your masks sit in stock at PPE MAX. Replacement visors are one item you can order. Head harnesses are another, plus exhalation valves and filter connectors. Parts like these stretch the life of a mask. Fit testing questions can go to the technical support email. Filter selection gets covered too. Paperwork for compliance comes with the same support.

FAQ

Q: How does This product differ from a half-face respirator?

A: One sealed unit on This product covers the eyes, nose, and mouth. Run in negative-pressure mode, it delivers APF 50. Half-face models reach APF 10 only. With a half-mask your eyes stay uncovered. This one shields them.

Q: Which filter cartridges are compatible with your full face masks?

A: Our masks use standard RD40 / EN 148-1 threaded connectors, compatible with OV, acid gas, P100, and combination cartridges from a broad range of manufacturers.

Q: What is the minimum order quantity?

A: 100 pcs is the MOQ. Once you reach that quantity, a custom logo and custom packing are both available.

Q: Is it possible to get a sample first, before putting in a bulk order?

A: Yes. Sample production is available so your evaluation can proceed before committing to a full order.

Q: Is CE documentation provided with the order?

A: Yes. CE certification support is part of the deal. Paperwork for your compliance and import needs can be provided too.

Q: What sort of after-sales support is available?

A: Spare parts come from PPE MAX. Email technical support is there too, for upkeep and compliance work as time goes on.

Contact Us

Want to source a full respirator mask? Send us an email at bettybing@ppemax.com. Ask about product details, samples, or a quote.